During daily wiping and maintenance, first dip a clean cotton cloth in protective oil, wipe the metal surface clean to remove dirt and rust spots, wipe it with a clean white cotton cloth, and then apply a thin layer of oil film on the metal surface.
Packaging:18L, 200L
Product performance：
1. The operation is simple, which can simplify the anti-rust process and improve the anti-rust effect;
2. The oil layer is thin, the amount is saved, the coating is beautiful, and it is not easy to drain;
3. Easy to remove and has little impact on subsequent processing;
Application scope：
It is used for daily wiping and protection of weapons and equipment in areas above -40℃; used for rust prevention between copper, aluminum and other ferrous and non-ferrous metals, and mechanical parts processing; used in the automobile industry, shipbuilding industry, aviation industry, machining industry, parts industry, tool machinery, and maintenance industry.
FAQ：
Q: Mistakenly believe that the greater the viscosity of lubricating oil, the better the lubrication effect
Viscosity is the main indicator of lubricating oil, and its standard is usually determined at a temperature of 100°C to determine the grade of lubricating oil. The higher the grade, the thicker the lubricating oil film formed. Although the friction on the friction surface is reduced, the resistance is increased, the power loss is increased, and the waste of energy is increased.
When the machine is just started, the temperature is low. After working for a period of time, part of the lubricating oil on the friction surface is lost due to the increase in temperature. The lubrication cannot form an effective lubricating oil film, and the oil cannot be quickly replenished to the friction surface of the machine. Due to the high viscosity of the oil, the flow is slow, resulting in greater wear of the machine parts.
Some data show that if the viscosity of lubricating oil is reduced by 1mm2/s, 15% of fuel can be saved. The choice of viscosity should consider factors such as working speed and working temperature. Lowering the viscosity of lubricating oil is one of the current fuel-saving measures.
Q: What is the phenomenon of industrial gear oil deterioration?
① Appearance changes. The color becomes darker and mixed, and emulsification occurs with obvious abrasive particles, mechanical impurities and sludge;
②Viscosity changes. The viscosity of oil containing viscosity index improver decreases due to mechanical shear, while the viscosity increases due to oil oxidation and emulsified sludge;
③Changes in acid value. In oils containing high acid value additives, the decrease in acid value in the early stages of use indicates the consumption of the additives and the increase in acid value in the later period is the result of oxidation to produce acidic products;
④ As the water content increases, the anti-emulsification performance becomes worse, and the hydrolysis of the extreme pressure agent affects lubrication and tooth surface pitting and gluing may occur;
⑤ The insoluble matter of phenylpentane (petroleum ether) increases, which is the result of contamination caused by oxidation products and metal shavings and dust at high temperatures during long-term use of the oil.
latest news
Coal mine customer successfully signed a contract with Taiyi, opening a new chapter of cooperation
Recently, Zhengzhou Taiyi Lubricant Technology Co., Ltd. and a large coal mining company formally signed a strategic cooperation agreement at a solemn and enthusiastic signing ceremony, marking a solid step in the cooperation between the two parties in the field of lubricants. This cooperation is not only an important measure for both parties to complement each other's advantages and share resources, but will also inject new ideas into equipment lubrication solutions for the coal mining industry.
2025-07-25
International friends and businessmen come to Taipei to explore new opportunities for cooperation
Recently, Zhengzhou Taiyi Lubricant Technology Co., Ltd. welcomed a group of important international guests - a customer inspection group from Yemen. The purpose of this inspection was to gain an in-depth understanding of the factory's production strength, technical level and product quality, and to lay a solid foundation for further cooperation between the two parties.
2025-07-18
Navigation
Navigation
Contact Info
Contact Info
Telephone：400-993-7066
WeChat：ty4009937066
Address one：No. 251, Yaohua Road, China (Shanghai) Pilot Free Trade Zone
Address two：Zhongmu New District, Zhengzhou City, Henan Province
