Engine protectant

This product contains a unique anti-wear repair factor that effectively repairs engine wear caused during cold starts.

Packaging:350ml

Inquire Now >>

Product performance：

1. Effectively reduce the wear and shift impact of the transmission gear set in the car, and eliminate slow shifting, shifting shock, transmission slippage, and trembling at start;

2. Improve the oxidation resistance and viscosity-temperature properties of the transmission oil, reduce the generation and accumulation of sediments such as sludge, and maintain the good heat dissipation performance of the transmission oil;

3. Restore the elasticity and sealing effect of oil seals and sealing rings to prevent seal leakage. Maintain the excellent fluidity of the transmission oil in the car at low temperatures, inhibit high-temperature oxidation, and extend the life of the transmission oil;

Application scope：

This product is suitable for various MTF, ATF, DCT, CVT gearboxes.

FAQ：

Q: Why measure the demulsification performance of steam turbine units?

Demulsification degree is an important indicator for steam turbine lubricants. It is to measure the time for oil and water to separate under specified conditions. Since water or water vapor may enter due to abnormal system conditions during the operation of a steam turbine or hydraulic turbine, the oil may emulsify. In order to resist the demulsification effect of water on the oil, the steam turbine oil is required to have a certain demulsification ability to ensure that the oil can be used in the equipment for a long time. The short demulsification time indicates that the emulsion can quickly demulsify and separate oil and water. On the contrary, the situation is opposite. Therefore, the shorter the demulsification time of the oil, the better.

At this time, it is necessary to have a vacuum oil filter with demulsification function to filter the oil online to remove a small amount of moisture and impurities that enter the system due to aging or damage of the steam seal.
Q: How to determine the oil change period and oil change index of compressor oil?

The oil change period of compressor oil varies with the structure of the compressor, compressor medium, operating conditions, lubricating oil method and lubricating oil quality. During operation, it is unrealistic to clearly specify how often the oil should be changed. The oil change time can only be determined based on the prevailing conditions. During use, samples should be taken regularly to observe the color and cleanliness of the oil, and the physical and chemical properties of the oil should be regularly analyzed such as oil viscosity, acid value, n-conane incompatible substances, etc.

If one of the following conditions occurs, you should consider changing the oil:

①The color of the oil appears green, or the color number deepens by 4 levels;

②The acid value exceeds 0.5mgkoK/g;

③Viscosity change exceeds 15%;

④N-heptane does not tolerate substances exceeding 0.5%.

Products List