Product performance：
1. Long life - high-quality unique additives can extend the service life of grease and equipment;
2. Moisture resistance - resist the erosion of fresh water and salt water;
3. Reduce component wear—Resist softening and continue to protect parts under load and high speeds;
4. Anti-corrosion - resist oxidation and protect metal from rust;
Application scope：
Bearings for hot rolling mills in steel plants, papermaking, textiles, printing and dyeing, mining motor bearings, serpentine spring couplings, rubber-coated vulcanized bearings for conveyor rollers, and other bearings, hot rolling and cold roll bearings in the steel industry, lubrication of large equipment such as bale rotary tables, sector rollers, tension straightening machines and pendulum shears, gears, etc. in continuous casting equipment, lubrication of conveyor rollers, and high-temperature bearings of various dryers in the textile, printing and dyeing industry.
FAQ：
Q: Can different types of grease be mixed?
If the base oil types are the same, such as petroleum lubricants or other greases of the same base oil, greases made of different soap bases or thickeners should generally not be simply mixed. Certain types of greases, such as calcium-based grease and sodium-based grease, or lithium-based grease and lithium complex-based grease, can be mixed with each other. Generally, the performance will not change too much and the use will not be affected.
However, extreme pressure grease contains various active components. When mixed with each other, the additives will interfere with each other, causing the colloidal stability or mechanical stability of the grease to deteriorate, affecting its performance. Before different types of grease are mixed with each other, the performance of the mixed grease should be measured to confirm that there is no obvious impact before use.
Q: Can mineral hydraulic oils of the same viscosity be used interchangeably?
cannot. Because although they have the same viscosity, the types are very different. High-pressure systems that require anti-wear hydraulic oil must not be replaced with L-HH or L-HL oil, otherwise it will cause premature scrapping of the equipment oil pump and operational failure. In cold areas, the L-HV and L-HS oil required for hydraulic systems cannot be replaced with L-HM oil of the same viscosity grade, otherwise problems such as difficulty in cold start will occur.
latest news
Coal mine customer successfully signed a contract with Taiyi, opening a new chapter of cooperation
Recently, Zhengzhou Taiyi Lubricant Technology Co., Ltd. and a large coal mining company formally signed a strategic cooperation agreement at a solemn and enthusiastic signing ceremony, marking a solid step in the cooperation between the two parties in the field of lubricants. This cooperation is not only an important measure for both parties to complement each other's advantages and share resources, but will also inject new ideas into equipment lubrication solutions for the coal mining industry.
2025-07-25
International friends and businessmen come to Taipei to explore new opportunities for cooperation
Recently, Zhengzhou Taiyi Lubricant Technology Co., Ltd. welcomed a group of important international guests - a customer inspection group from Yemen. The purpose of this inspection was to gain an in-depth understanding of the factory's production strength, technical level and product quality, and to lay a solid foundation for further cooperation between the two parties.
2025-07-18
Navigation
Navigation
Contact Info
Contact Info
Telephone：400-993-7066
WeChat：ty4009937066
Address one：No. 251, Yaohua Road, China (Shanghai) Pilot Free Trade Zone
Address two：Zhongmu New District, Zhengzhou City, Henan Province
