This product uses lithium soap as the thickener and adds extreme pressure additives. These additives enable the grease to form an effective lubricating protective film on the metal surface under extreme conditions of high load and high pressure. Applicable temperature: -20℃～120℃
Model:1#, 2#, 3#
Packaging:15KG, 170KG
Product performance：
1. Excellent extreme pressure and anti-wear performance, effectively preventing wear and pitting of the friction pair and extending the service life of the equipment;
2. Excellent pumpability, meeting the grease supply requirements of centralized lubrication systems;
3. It has good mechanical stability and can maintain a certain consistency without loss during use;
4. It has certain anti-rust properties and can prevent corrosion of bearings during operation;
Application scope：
Lubrication of bearings and gears of high-load mechanical equipment, lubrication of cold and hot rolling mills and blast furnace ancillary equipment in the metallurgical industry, steelmaking hoisting equipment, and mechanical equipment in mining and other industries.
FAQ：
Q: Can different types of grease be mixed?
If the base oil types are the same, such as petroleum lubricants or other greases of the same base oil, greases made of different soap bases or thickeners should generally not be simply mixed. Certain types of greases, such as calcium-based grease and sodium-based grease, or lithium-based grease and lithium complex-based grease, can be mixed with each other. Generally, the performance will not change too much and the use will not be affected.
However, extreme pressure grease contains various active components. When mixed with each other, the additives will interfere with each other, causing the colloidal stability or mechanical stability of the grease to deteriorate, affecting its performance. Before different types of grease are mixed with each other, the performance of the mixed grease should be measured to confirm that there is no obvious impact before use.
Q: Can mineral hydraulic oils of the same viscosity be used interchangeably?
cannot. Because although they have the same viscosity, the types are very different. High-pressure systems that require anti-wear hydraulic oil must not be replaced with L-HH or L-HL oil, otherwise it will cause premature scrapping of the equipment oil pump and operational failure. In cold areas, the L-HV and L-HS oil required for hydraulic systems cannot be replaced with L-HM oil of the same viscosity grade, otherwise problems such as difficulty in cold start will occur.
Latest News
Thermal Heat Transfer Fluid Selection Guide | Common Usage Pitfalls 2026
Industrial thermal heat transfer fluid is core to thermal oil boiler operation. Most enterprises fail due to wrong fluid type, mismatched open/closed system and unclean oil replacement. This 2026 guide solves common thermal oil usage mistakes.
2026-07-13
How to Choose the Right Open Gear Oil | Heavy-Duty Industrial Lubrication Guide
Open gear oil and closed gear oil cannot be used interchangeably in heavy industries. This 2026 guide explains their core differences and shares scientific selection methods for rotary kilns, ball mills and other heavy equipment to avoid lubrication failures and reduce operating costs.
2026-07-09
High-Speed Aluminum Wire Drawing Oil: Enhance Lubrication & Surface Finish for Aluminum Wires
Taiyi high-speed aluminum wire drawing oil is formulated with refined mineral oil and premium additives, forming a strong lubricating film to reduce friction, remove metal debris, protect aluminum from oxidation and discoloration, and improve surface finish for various aluminum processing applications.
2026-05-21
Navigation
Navigation
Contact Info
Contact Info
WhatsApp：+86 188 3819 4302
WeChat：+86 178 3696 3832
Address one：No. 251, Yaohua Road, China (Shanghai) Pilot Free Trade Zone
Address two：Zhongmu New District, Zhengzhou City, Henan Province
