This product is made by thickening medium viscosity mineral oil with lithium hydroxystearate soap, and adding various additives such as antioxidant and anti-rust. It is a multi-purpose, long-life, wide-temperature grease.
Model:1#, 2#, 3#
Packaging:15KG, 170KG
Applicable temperature:-20℃～120℃
Product performance：
1. Strong versatility, excellent mechanical stability and oxidation stability;
2. Good water resistance and rust resistance, can be used on mechanical parts that are wet and in contact with water;
3. Extremely strong adhesion, providing effective long-term protection for lubricated parts
Application scope：
It is suitable for the lubrication of rolling bearings, sliding bearings and other friction parts of engineering machinery and equipment under general load conditions, such as excavators, cranes, loaders, etc.; 2# can be used in the centralized lubrication system of engineering machinery.
FAQ：
Q: Can different types of grease be mixed?
If the base oil types are the same, such as petroleum lubricants or other greases of the same base oil, greases made of different soap bases or thickeners should generally not be simply mixed. Certain types of greases, such as calcium-based grease and sodium-based grease, or lithium-based grease and lithium complex-based grease, can be mixed with each other. Generally, the performance will not change too much and the use will not be affected.
However, extreme pressure grease contains various active components. When mixed with each other, the additives will interfere with each other, causing the colloidal stability or mechanical stability of the grease to deteriorate, affecting its performance. Before different types of grease are mixed with each other, the performance of the mixed grease should be measured to confirm that there is no obvious impact before use.
Q: Can mineral hydraulic oils of the same viscosity be used interchangeably?
cannot. Because although they have the same viscosity, the types are very different. High-pressure systems that require anti-wear hydraulic oil must not be replaced with L-HH or L-HL oil, otherwise it will cause premature scrapping of the equipment oil pump and operational failure. In cold areas, the L-HV and L-HS oil required for hydraulic systems cannot be replaced with L-HM oil of the same viscosity grade, otherwise problems such as difficulty in cold start will occur.
Latest News
Thermal Heat Transfer Fluid Selection Guide | Common Usage Pitfalls 2026
Industrial thermal heat transfer fluid is core to thermal oil boiler operation. Most enterprises fail due to wrong fluid type, mismatched open/closed system and unclean oil replacement. This 2026 guide solves common thermal oil usage mistakes.
2026-07-13
How to Choose the Right Open Gear Oil | Heavy-Duty Industrial Lubrication Guide
Open gear oil and closed gear oil cannot be used interchangeably in heavy industries. This 2026 guide explains their core differences and shares scientific selection methods for rotary kilns, ball mills and other heavy equipment to avoid lubrication failures and reduce operating costs.
2026-07-09
High-Speed Aluminum Wire Drawing Oil: Enhance Lubrication & Surface Finish for Aluminum Wires
Taiyi high-speed aluminum wire drawing oil is formulated with refined mineral oil and premium additives, forming a strong lubricating film to reduce friction, remove metal debris, protect aluminum from oxidation and discoloration, and improve surface finish for various aluminum processing applications.
2026-05-21
Navigation
Navigation
Contact Info
Contact Info
WhatsApp：+86 188 3819 4302
WeChat：+86 178 3696 3832
Address one：No. 251, Yaohua Road, China (Shanghai) Pilot Free Trade Zone
Address two：Zhongmu New District, Zhengzhou City, Henan Province
